KNOG Power Rider 450L - Black

LIGHT OUTPUT : 450 Lumens
POWER BANK : 2200 mAh
DIMENSIONS : 122 x 30mm Ø
WEIGHT : 115g
FITS HANDLE BARS : 22.2mm - 31.8mm Ø
WHAT'S IN THE PACK : Light, Silicone Strap, USB Cable, Hex Key

The two “Charger” lights come with 6 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours.

ELLIPTICAL BEAM

Elliptical beam for wide view works with spot beam for intense light in front of front wheel.

CHARGE YOUR DEVICES

Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. 

PROGRAM YOUR MODES

The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu.  You can do things such as control brightness, adjust runtimes and add new light modes.
DOWNLOAD MODEMAKER APP (BETA) >

FITTING YOUR NEW LIGHT TO YOUR BIKE :

QUICK VIEW INSTRUCTIONS

Place your light on the handle bar with “knog” logo on strap facing forward. There are two holes to choose from depending on your bar diameter. (You can rotate the light 90˚ to make it easier to hook the silicone strap on)

USING THE BUTTON:

Your light comes with one button found on the bottom of the light near the lens, it provides many functions. To turn on press and hold the button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on, a short press of the button changes modes

CHARGING YOUR LIGHTS:

PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap. You cannot charge the light through the larger USB type A port. This is for charging other devices with your PWR